Joined: 02 Dec 2006
|Posted: Fri Jun 17, 2011 12:30 pm Post subject:
Thank you for your message.
You may have to remove an existing adaptor. First establish the Type of mount for your Caliper, Fork or Frame.
Type 1: IS (International Standard) - holes at 52mm centres.
Type 2: PM (Post Mount) - holes at 74mm centres.
Notes: All part codes start with OBE example BMS120 has full part code OBE-BMS120
Almost all Frames have IS mounts.
For IS Caliper To IS Fork or Frame - see BMS118, BMS120 or Kits BOS18, BOS20.
For PM Caliper To IS Fork or Frame - see BMS318, BMS 318-1, BMS320 BMS 320-1, BMS32R. BMS618G, BMS620G
For PM Caliper To IS Fork and 20mm IS axle - see BMS418, BMS420
For PM Caliper To PM Fork (including Manitou forks) - see BMP518, BMP520
For IS Caliper to PM Fork - see BMP120